STRONGER, THINNER AND EVEN CLOSER TO PERFECTION!
The new Cerinate® ceramic will win you over
with ultra-thin veneers, a perfect
fit and an even more natural appearance.
CHANGE YOUR LIFE NOW!
It doesn’t matter whether you’ve got discoloured,
misaligned teeth or gaps – with LUMINEERS® G3
you can change them in just two to three sessions with
a top specialist. LUMINEERS® G3 excel above all due to
their supreme quality and their best accuracy of fit!
YOU DESERVE TO SMILE!
Even rows of teeth which look natural: LUMINEERS® G3,
the new generation of veneers,
make teeth shine again.
The especially resistant ceramic layers are the perfect solution
for broken-off edges, irregular teeth or discolourations, so that at last
you can smile as you’ve always wanted to!
The wafer-thin, very robust dental veneers are custom-made
in a complex process and consist of patented » Cerinate® ceramic «.
This innovative porcelain is only available from the Cerinate Smile Design
Studios of the Smile4Life company in Liechtenstein or the USA.
After just two or three visits to the dentist, Smile4Life Est.
supplies a custom-made product for each patient, which has been
clinically proven to last for twenty years.
NO GRINDING, NO INJECTIONS, NO PAIN!
LUMINEERS®, in contrast to other veneers, do not,
in most cases, necessitate ANY grinding of the teeth.
Consequently, anaesthetics or injections are superfluous!
While your LUMINEERS® are being made for you, a temporary
restoration is not required. Once LUMINEERS®
have been put into place, there is no pain and no sensitivity,
and they look natural from the start!
Lumineers G3 Workshop
STRONGER, THINNER AND EVEN CLOSER TO PERFECTION!
The aim of Smile4Life has always been to make it possible
to have perfect teeth, which, apart from being
extremely robust, also look so real that they look just the same
as natural teeth. This is exactly what the third generation
of Lumineers has made possible!
This highly aesthetic result has been achieved in co-operation
with Geneva University under the leadership of
Prof. Dr. med.dent. Ivo Krejci. A process developed
by Smile4Life has enabled the ceramic to be prepared
even more thinly (0.2 mm!).
The simultaneous development of the innovative glazing material
(LumiGlace) has resulted in subtleties and structures that are
unbelievably similar to natural teeth.
A higher translucence due to the thin ceramic layer also requires
a higher degree of robustness. The new processing technology
and the enhanced Cerinate® ceramic mean that Lumineers G3 / Brilliance
are now even stronger and can withstand pressure of up to 252 megapascal!
Dr. Martine Zisserman
KOL and Speaker for Lumineers in France.
It has always been my intention, since being a dentist, to use,»non-invasive« treatment methods. When I saw Lumineers® for the first time, I knew that »Lumineers were the right thing for my patients! « I have now been using Lumineers® for more than 8 years, and my enthusiasm continuously increases with each patient that I treat. A big compliment to Smile4Life, which produces the most beautiful, thinnest and most natural veneers that I have ever seen.
Prof. Dr. I. Krejci
(President, Ecole de Médecine Dentaire, University of Geneva)
Lumineers® are aesthetic, extremely thin, completely adhesive veneers made of high-strength, patented Cerinate® ceramic. They are, therefore, ideally suited to types of restoration that are gentle on tooth enamel, such as the »no-prep« technique. Despite perfect adhesion, Lumineers can, if necessary, be completely detached from the tooth with no grinding using an Er:YAG laser, and they have therefore become integrated in the best way into modern dentistry, which is geared towards preserving teeth for life.
YOU CAN ALSO LEARN TO PERFECT AESTHETIC TREATMENT USING LASERS!
• No anti-haemorrhagic agents necessary
• Foreseeable and faster healing
• No retraction threads required
• Take dental casts on the same day
• No degeneration of the gums
• Minimum discomfort
• Precise, clearer dental casts
with exposed preparation limits
REFERENT: DOZ.DR. YERIT KAAN
studied Medicine and Dentistry at the Medical University of Vienna.
After his postdoctoral degree and appointment as assistant professor
in the field of Oral and Maxillofacial Surgery, he attended a university course for managers in the healthcare sector and was appointed manager of a dental outpatient clinic, which he ran for six years. Since 2006, he has been established in an independent practice in Vienna and specialises in Facial and Dental Aesthetics. He is a member of numerous medical and dental organisations and gives lectures nationally and internationally.
Impressions
LED mirror
the trendy mirror with LED
light and dual magnification
perfectly matches your slim sonic
toothbrush. A “must have” for your
handbag or cosmetic bag.
light and dual magnification
perfectly matches your slim sonic
toothbrush. A “must have” for your
handbag or cosmetic bag.
Refreshing wipes
Rolled, individually packed and pre-moistened. You can offer them to your patients either cold or warm. The tissues are for single use, are biodegradable and environmentally-friendly. A good option for increasing well-being and the bond with your patient. White Towel refreshing wipes are made of 100 % cotton. Each of the tissues is
Preheating oven for refreshing wipes
This oven was especially developed and manufactured for warming refreshing wipes. It is light, develops a temperature of 70 – 80° C inside, with a 7.5 litre capacity, which is sufficient for preheating refreshing wipes for the whole day. It has a safety shutdown mechanism at 102° C, so that it is impossible to overheat the refreshing wipes.
The Snap-On Smile – the name says it all. Simply “put it over the existing teeth and snap it into place”. It offers you a whole range of clinical short- and long-term restorations.
Snap-On Smile is a reversible temporary prosthesis made of crystallised acetyl resin, which is put over the natural teeth. This interim restoration, which is custom-made, does not require any preparation, anaesthesia or adhesion. It is, therefore, the ideal solution as a temporary prosthesis before the actual implant.
Innovative Method
Snap-On Smile offers a non-invasive, restorative option for a large number of short- and long-term clinical challenges. It’s the ideal replacement for uncomfortable partial and cumbersome temporary braces, which not only make eating difficult, but also irritate the patient’s palate and gums.
Temporary prosthesis implant
Snap-On Smile is the perfect solution, in particular as a temporary prosthesis or interim restoration during treatment for a dental implant. Augmentation and implant can heal and grow in at their own speed, while the patient has dental restoration that is of high quality and aesthetically pleasing. At the same time, it promotes the regeneration of the actual treatment, primarily in the area of the posterior teeth, which is put under extreme stress by mechanical forces. This enables the person carrying out the treatment to spend the minimum amount of time on it, as it is a custom-made solution. Only a dental cast is necessary to make a request for the temporary prosthesis, which is supplied ready-made. Using Snap-On Smile as a temporary implant restoration is, therefore, a win-win situation for patients and dentists alike.
Easy to apply
Snap-On Smile is comfortable, very flexible, extremely robust and easy to apply: it can quite simply be put over the existing teeth – without preparation, injections or adhesion.
Numerous indications
Snap-On Smile is extremely suitable as a temporary aesthetic implant restoration and as a removable partial set of teeth, as well as for diagnostic bite elevation and for cosmetic improvement of the smile. Snap-On Smile can also be used as bruxer splints.
Examples of use
Diagnostic support
- Temporary restoration for implants
- Cosmetic improvements, tooth protection or for a white smile
- Removable dentures, also for missing teeth
- Can be used as bruxer splints or sport splints
- Low budget solution as an alternative to a traditional model casting prosthesis